Lift Kits for Trucks and SUVs

Written by Deborah Pitts on May 9, 2023 in Truck Shop Services with no comments.

Lift kits are a popular modification for truck and SUV enthusiasts. They allow for taller tires and more suspension travel.

Lift Kits

However, deciding to lift your vehicle can be a costly mistake if you’re not careful. It may affect your fuel economy and void warranties. There are also legal ramifications to consider.

The body kit market is huge nowadays, and there is a lot of choice for the consumer. These aftermarket parts aren’t essential for the longevity or performance of your car, but they can significantly change its aesthetics and overall look. They are also an easy way to customize your vehicle. There are a variety of kits available for any car that range from mild to wild, and you can even mix and match different components to get the exact look you want.

These kits can be made of fiberglass, polyurethane, or carbon fiber, depending on your preference and budget. They can help reduce lift at high speeds, which can improve handling. They can also make your vehicle more appealing to the eyes of other motorists, especially if you have a large rear spoiler or a bonnet with vents or scoops.

You can choose from a wide variety of colors and finishes for these aftermarket parts. When choosing a body kit, you should carefully consider the color and finish that best suit your car. It should also be compatible with the wheels you plan to use and the suspension of your vehicle. In some cases, you may need to lower the ride height in order for the front and rear bumpers and side skirts to sit correctly with the fenders.

Before installing a body kit, you should thoroughly inspect each piece. This will ensure that it not only fits your specific model but also that the individual pieces are symmetrical. You can do this by laying out each part on the ground and then comparing it to the factory part of your car. Once you are satisfied that everything is correct, it’s time to start putting on the pieces.

The first thing to do is apply degreaser to all exposed areas of the body kit and then clean each piece. It is important that you don’t apply the kit until all surfaces have been cleaned thoroughly, as dust and dirt can easily damage the pieces and cause them to shift over time. If you have any questions about the process, don’t hesitate to ask for assistance from a professional.

Suspension Kits

Suspension lift kits are designed to give your truck or SUV a significant height boost without compromising performance. They typically include suspension parts that are tuned for off-road handling and a higher ride height of four to 10 inches. They also increase your vehicle’s ground clearance, giving it more room for larger tires and wheels. In addition, they often include shock absorbers that are more responsive to different terrain and driving styles. However, the increased performance and height boost come at a price, both in terms of money and time to install them.

The main components in a suspension kit include coil springs, leaf spring shackles, struts and torsion bars, shocks, a torsion key (for front suspensions), and brackets. The best way to decide on a suspension kit is to speak with an expert or find a trusted online resource. They can help you find a system that meets your budget and specifications while keeping the cost low.

A body kit is much less expensive than a suspension kit and can be installed by the average car owner. They simply add spacers between the frame and the chassis, allowing you to drive your vehicle higher and allowing for larger wheels and tires. This can make your vehicle look more aggressive and give it a unique appearance.

While a lift kit can enhance the look of your vehicle, it is important to remember that the raised center of gravity can reduce safe operating angles and road handling. You should always have a certified mechanic install a lift kit to avoid any issues with safety or mechanical damage.

Before installing a lift kit, it is important to check your state’s laws regarding the maximum legal height of your vehicle. It is also a good idea to talk with your insurance agent, as the modification may impact your coverage. Additionally, the lift kit may void your warranty. To avoid any misunderstandings, it’s smart to read your manual carefully and follow the included instructions. A reputable company even includes a warning on its installation instructions.

Stacking Kits

Stacking kits allow you to mount your dryer on top of your washer, giving you more room in the laundry room and making it easier to transfer wet clothes from the washer to the dryer. The kits usually contain a support system to raise the dryer up, and they also include brackets that secure the machines together. They can be used on both gas and electric units. They are available for a variety of washer and dryer brands and models, and they typically cost from $40 to $100.

Before you buy a stacking kit, check your washer and dryer’s manuals to ensure that they are compatible. If the appliances are not compatible, they may not be safe to stack and could fall over during operation or during a cycle. You should also ensure that you have enough space to accommodate the two appliances, including a few inches for venting and natural vibrations.

Depending on the type of appliances, you may have to lift them to get them into place. This can be difficult for people in wheelchairs or those who are short, so it is important to have someone help you. Also, it is important to have a sturdy step stool or ladder to reach the top of the dryer, where you will need to load and unload laundry.

You can also purchase a pedestal to elevate your dryer, which can make it easier for you to reach it and reduce the amount of work you need to do. Some pedestals are adjustable, so you can move them up and down as needed. Some even feature a drawer that can be used to store detergents and other laundry supplies.

You can also use a piece of cardboard to lean your dryer against, which will protect it from damage and make it easier to move. If you are using a stacking kit that comes with legs, keep the legs in a safe place in case you decide to unstack the machines later. Also, it is a good idea to keep the appliances at least a few inches away from each other, as this will help them stay stable during operations and prevent them from knocking into each other.


There are some legal issues associated with lift kits. Depending on the type of lift kit you choose and how high you want to raise your truck, you could run into problems with local or state laws.

For instance, most states have height limitations for vehicles. For example, limits trucks to a maximum of 13.5 feet tall and 45 feet long. This means that if you install a lift kit that raises your truck to more than this height, it will require you to have a commercial driver’s license in order to drive the vehicle on public roads. Other legal issues are centered around insurance, warranties, and resale.

A suspension lift kit increases the distance between your vehicle’s undercarriage and the road surface, which improves off-road capabilities. However, this upgrade can cause the vehicle to lose handling efficiency and may also affect towing capability.

Another potential issue with a suspension lift kit is that it adds more weight to the vehicle. This can negatively impact fuel economy in two ways: it increases the vehicle’s center of gravity and decreases its acceleration and top speed.

Body lift kits are legal in most states, but there are a few things to keep in mind. The first is that they typically require you to use larger tires, which can increase the overall weight of your vehicle and diminish its gas mileage. They can also make the vehicle look awkward and unnatural if they are not properly installed.

In addition, most body lift kits include a strut spacer that can increase the height of the truck, which can compromise the quality of the ride and reduce stability when cornering or making emergency-avoidance maneuvers. Finally, you should check with your insurance company before installing a lift kit, as it might increase your premiums or even void your warranty. This is especially true if you install a suspension lift kit on a newer vehicle that still has its original manufacturer’s warranty. A good insurance agent can help you find the best coverage and rates for your unique situation. They can also walk you through the process of modifying your vehicle without voiding its warranty.

Comments are closed.